SUV Converted To Snowplow, Boom Truck

SUV Converted To Snowplow Boom Truck ATV S Although the body on Dennis Severson’s 37-year-old Ramcharger SUV was rusted out the 318 engine and automatic transmission were still good So he stripped off the body and mounted a cab from a 35-year-old self-propelled International combine on the chassis Then he mounted a snowplow up front and a home-made boom with a 5-ton winch on back     Severson uses the rig to plow snow in his yard and around Amery Small Motors the business he owns in Amery Wis He also uses it to skid logs from the woods to make firewood     Severson made brackets to attach the cab directly to the truck frame to keep the height down The vehicle is just over 7 ft tall which lets him drive under a lot of branches in the woods that he used to hit while skidding logs with his tractor The cab mount is reinforced with bracing that’s connected to the steering column which is angled into the cab The original 3-speed automatic transmission shift lever is still on the column and the clutch brake and footpedal are on the floor He made a gauge cluster for the speedometer fuel amps and temperature His plow and winch controls are on the panel that used to hold the combine’s controls     Severson swapped out the original combine cab seat for a high-back bucket seat that he mounted on a swivel He says that setup works great when he’s plowing snow because he sits low to the ground and can turn from one side to another and easily see all around In warmer months he swaps that seat out for a smaller one from a riding lawn mower that’s easier to get in and out of when he’s skidding logs     “The biggest benefit of the combine cab is having 5 1/2 ft of clear glass in front of me ” Severson says “The sides and rear also have big windows so I’ve got excellent visibility all around ” The cab has a good heater and fan so he’s plenty warm during the winter In the summer he takes off the door and opens a window for natural air conditioning The combine cab didn’t have a windshield wiper so he cut one of the wiper motors out of the old Ramcharger cab and put it on his new rig with an extra long blade “It works great ” he says     Severson built a boom on the back of the SUV frame so he can use the vehicle to skid logs for the 30 cords of firewood he cuts every year “I was in the towing business for 20 years so I had a fairly good idea how to build a boom that would support a 10 000-lb winch ” he says The boom is made from a stabilizer leg that was mounted on one side of an old Army tank retriever The telescoping tube is supported by framework made of square tubing A single hydraulic cylinder raises and lowers the boom and extends it to the ideal pulling angle Severson installed a new Super Winch in front of the boom and operates it with a hand-held remote The 1/2-in cable extends 100 ft so he can retrieve logs that he can’t back up to      Severson says he really likes the short turning radius and automatic transmission with 4-WD on his plower/skidder “It works great for plowing snow and handling rough terrain in the woods thanks to the oversized Thornbird tires For plowing deep snow I chain up the rear tires for extra traction It has been a real versatile and dependable outfit for year-around use and I was able to build it mostly from scrap materials and about $300 to $400 out-of-pocket for the winch and remote control ”     Contact: FARM SHOW Followup Dennis Severson 704 70th Ave Amery Wis 54001 ph 715 268-7085; asmvern@amerytel net

To read the rest of this story, download this issue below or click here to register with your account number.