Mower Converted To Riding Dump Cart

Mower Converted To Riding Dump Cart FARM HOME Lawn Mowers 31h 38 Kenneth Foster turned his Poulan riding mower into a riding dump cart making it handy for hauling tools firewood or any other materials “I cut a lot of firewood ” explains Foster “I can load up the cart with my chainsaw and other tools hook up the splitter and drive onto my 17-ft trailer to head to the woods ” “I built an extended frame out of salvaged road signpost material It’s 1 3/4-in square steel tubing lightweight but very strong ” says Foster “I slid lengths of the tubing alongside the frame to either side of the seat as far as I could and welded them to the riding mower frame ” He then attached a crosspiece just behind the mower and mounted a steel plate at the ends of the tubing Foster reinforced the end plate with angled tubing from its bottom edge back to the bed frame Steel plates welded to the sides of the frame extensions the support tubing and the end plate create a solid tipping point for the dump bed This also creates a sturdy foundation to which Foster can attach his 1 1/2-in receiver hitch and a ball for towing his wood splitter “To create a pivot for the box to dump I welded 5/8-in pins to pieces of flat steel and welded the flat steel to the angle iron at the bottom rear of the dump box ” says Foster “With the box in place I slid pieces of pipe over the pins and welded them to the rear plate I can dump it by hand when I want ” Contact: FARM SHOW Followup Kenneth Foster 22522 231 Terrace Springhill Kan 66083 ph 913 244-5964; bbfbuilderkf@yahoo com

To read the rest of this story, download this issue below or click here to register with your account number.