You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Homemade Wrench Tightens Nuts On Scaffolding
Scott Testory, Farmer City, Ill.: “The second-hand scaffolding I bought to paint my house uses wing nuts to fasten the cross braces. I realized the nuts needed to be tighter when I walked around the scaffolding and saw the braces had become loose. I tried using a hammer to tap the wing nuts around, but the wings kept b
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Homemade Wrench Tightens Nuts On Scaffolding FARM SHOP Maintenance Scott Testory Farmer City Ill : “The second-hand scaffolding I bought to paint my house uses wing nuts to fasten the cross braces I realized the nuts needed to be tighter when I walked around the scaffolding and saw the braces had become loose I tried using a hammer to tap the wing nuts around but the wings kept breaking off the nuts So I developed this wrench to apply equal pressure to both wings on the nut as it’s tightened It works great “I started with a 1 by 8-in flat plate that was 3/16 in thick I drilled a 1/2-in dia hole about 1 1/4 in from one end and then reamed it out one size larger Then I put it in a vice fixture on my lathe and chucked up a 1/4-in mill bit I centered it in the previous hole and ran it out 1 in in both directions The last step was to round the corners and clean up the burrs ”
To read the rest of this story, download this issue below or click
here to register with your account number.
