“Cutting Edge” Products Fit Buckets And Pallet Forks

“Cutting Edge” Products Fit Buckets And Pallet Forks TRACTORS You might say we’re on the ‘cutting edge’ of what’s new for loader tractors and skid loaders ” says Ted McSherry IAM Mfg about his company’s new pallet fork and bucket-mounted accessories Quick-Tach Spade “It clamps onto your loader bucket or slides over pallet forks Works great for digging trenches and rooting out tree stumps or buried rocks ” says McSherry about their universal quick-tach spade The spade measures 12 in wide by 24 in long and slides on over pallet forks or clamps onto a loader bucket It comes with a pair of side-by-side tubes equipped with bolts that screw in sideways against the forks The unit is also equipped with a pair of screw-type clamps for attaching to a loader bucket You slide the tubes under the bucket and then screw the clamps on Clamp-On Tooth Bar For Buckets Their universal quick-tach tooth bar is designed for 4 5 and 6-ft buckets and comes with spaceable replaceable bucket teeth that bolt into a mounting bar It measures 5 ft 10 in long 12 in deep and 5 in high and weighs 107 lbs No modification to the bucket is required The unit fastens to both sides of bucket with a chain and turnbuckle-type system that wedges between the top and bottom of the bucket “It’s easy to put on no drilling is required and the teeth are easy to replace ” says McSherry “Works great for digging through hard soil or digging up hard packed manure By mounting all the teeth on one side you can even use it to dig a trench ” A 4-ft tooth bar sells for $249 plus S&H; a 5-ft bar for $299 plus S&H; and a 6-ft bar for $329 plus S&H Contact: FARM SHOW Followup Ted McSherry IAM Mfg LLC 3440 Youngfield St No 403 Wheat Ridge Colo 80033 ph 866 992-2333; ted@bucketsolutions com; www bucketsolutions com

To read the rest of this story, download this issue below or click here to register with your account number.