You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Log Splitter Made From Scrapped Combine
“We’ve probably split more than 200 cords of wood with this machine that we made from an old self-propelled combine,” says Henry Bohlen of West Burlington, Iowa. “It’s handy to move around and has a lot of power. Does a great job on any type of hardwood.”
Bohlen’s project started when he found a junke
.......... You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Log Splitter Made From Scrapped Combine COMBINES Conversions “We’ve probably split more than 200 cords of wood with this machine that we made from an old self-propelled combine ” says Henry Bohlen of West Burlington Iowa “It’s handy to move around and has a lot of power Does a great job on any type of hardwood ”
Bohlen’s project started when he found a junked Massey combine that had a decent drive train and frame First he removed the feeder house and all of the harvesting components leaving a bare frame with the original drive wheels drive train and rear wheels Since the combine’s original engine was hurting he replaced it with a Chrysler industrial flathead six He also put in a new radiator a 12-volt electrical system and a different gas tank He mounted a 24 gpm hydraulic pump on the front of engine that powers the splitter and the auxiliary lift that he uses to raise heavy logs onto the splitter
Bohlen says after getting the basic idea for the machine he just figured it out as he went along “There was very little frame left with most of the components of the combine gone so a 9-ft long 8-in wide H-beam was added from the engine to the two rear wheels and that same beam became the main structure for the splitter mechanism ”
Wide flange beams are much easier to work with for log splitters than regular I-beams notes Bohlen A 4 by 30-in long hydraulic cylinder moves the wedge to push the wood into the stationary pedestal Pushing the wedge into the wood is much more convenient because you aren’t always dragging the pieces back that still need to be split again
Bohlen says the combine’s hydraulic system provides plenty of power to split maple oak and various hardwood logs One side of the machine has a hydraulic hoist to lift heavy pieces of wood onto the splitter… “a real back saver ” Bohlen says
The self-propelled splitter also has a hydraulic blade that’s mounted on fabricated arms on the front The blade is useful for light duty work but the machine is too light in weight to push very much
Much of the welding and fabrication done was a project for a student in a world-class vocational welding class in Burlington High School in Burlington Iowa The student did a great job and won a first place national award from the Lincoln Welding Company annual contest
Contact: FARM SHOW Followup Henry Bohlen Wildlife Lakes Elk Farm 13852 Washington Rd West Burlington Iowa 52655 ph 319 752-4659; henry@wildlifelakes com
To read the rest of this story, download this issue below or click
here to register with your account number.