Chop Saw Mounts On Portable Stand

Chop Saw Mounts On Portable Stand WOODLOT EQUIPMENT Miscellaneous Stew Kunkel made a nifty portable stand for his metal chop saw It supports long pieces of steel to be cut lets him swivel the saw easily to cut angles and carries the saw into storage when not in use It even holds extra blades “The only thing I bought for it was aluminum C-channel for the work supports ” says Kunkel “The steel frame table was being discarded at work and I used a slewing bearing salvaged from an old swivel recliner ” Kunkel stripped the 6-ft long table down to its 42-in high 18-in wide steel tubular frame He reinforced it at the corners with bracing and welded steel plate at one end for a saw mount On the opposite side of the saw mount Kunkel welded a short length of threaded rod He hangs extra blades for the chop saw on the rod with spacer disks cut from poly sheets “The blades are held out of the way and the spacers help protect the blade tips ” explains Kunkel He used angle iron and steel plate to make a frame for the saw to set in and attached it to the saw mount with the slewing bearing in between When the saw is set into the frame it can be swiveled to any desired angle for cutting A pin lock welded to one side of the framework locks the saw into position Lengths of the aluminum C-channel were mounted on spacers to match the height of the chop saw cutting surface They provide support for longer pieces of metal being cut with the saw When not in use Kunkel removes the saw and tips the table on end Round stock welded to one end of the table and to legs at that end serve as wheel mounts They also serve as grab bars for tipping He fabricated a second angle iron frame and mounted it to the inside of the legs as a place to store the saw “I mounted fixed wheels on the ends of the legs and caster wheels to the corner of the table and the legs ” says Kunkel “If the table is down and in use I can tip the other end up and wheelbarrow it around as needed on the fixed wheels When it’s in storage mode the caster wheels make it easy to move the table around ” Contact: FARM SHOW Followup Stewart Kunkel 15728 153rd Ave S E Yelm Wash 98597 ph 360 701-1177 kskunkel@fairpoint net

To read the rest of this story, download this issue below or click here to register with your account number.