You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
New Tillage Tool Features 5-Sided Disk Blades
“I came up with the idea because I wanted to switch to vertical tillage, but I couldn’t find anything on the market I liked,” says Henry Falk, Effingham, Kan., who went to the shop and came up with innovative new 5-sided disk blades that he says work better than any other discs on the market.
He installed a set
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
New Tillage Tool Features 5-Sided Disk Blades TILLAGE EUIPMENT New Tools “I came up with the idea because I wanted to switch to vertical tillage but I couldn’t find anything on the market I liked ” says Henry Falk Effingham Kan who went to the shop and came up with innovative new 5-sided disk blades that he says work better than any other discs on the market He installed a set of his patented blades on a Case IH 496 28-ft disk He calls the new tillage tool a Rolling Spader because of the way the blade points spade up a little soil onto residue each time they come around Small cavities made by the points of the blades reduce erosion and help to boost water infiltration The flat sides on the 5-sided blades push crop residue down into the soil surface Only the points penetrate the soil to a depth of about 2 in or less “Most vertical tillage machines are equipped with round fluted blades which can damage soil structure and take a lot more power to pull My discs only slice a bit of the soil surface yet have better results Speed isn’t a factor he says “I’ve found that whether I pull it at 2 or 12 mph it does the same job Tillage tools with fluted coulters require a lot of weight to push the blades into the ground especially when they’re angled My blades are never all in the ground at the same time which makes a huge difference ” The blades can only be mounted on disks equipped with square axles so that the implement will run smooth without a lot of vibration “Converting to a square axle isn’t hard to do ” says Falk Two different 5-sided blades are available One blade is designed for Case IH disks and sells for $55 apiece plus S&H The other is for Deere and other disk brands and sells for $45 plus S&H You can see a video of the machine in action at www farmshow com Contact: FARM SHOW Followup Henry J Falk Vertical-Till Farms LLC 2079 Edwards Rd Effingham Kansas 66023 ph 913 370-0502
To read the rest of this story, download this issue below or click
here to register with your account number.
