"Straight Up" Post Puller

Straight Up Post Puller FENCING Miscellaneous “It works faster than any other post puller on the market It allows you to pull T-posts straight up out of the ground without having to bend over and without damaging the post ” says Bob Anderson Construction Accessories Inc Waynesville Ohio The patented JackJaw® T-Post Extractor is made from heavy gauge steel plate and tubing with a base plate welded onto the bottom It works on T-posts round electric fence posts and any other stake or pole up to 1 in thick The unit works like a ratchet on a jack except that it grabs the post using a pair of cam-shaped case hardened steel jaws The jaws which are free to slide up or down are connected by link arms to the handle When the handle is raised the jaws are in the open position The operator uses his foot to push the base plate up against the post with the jaws on either side of the long edge of the post When he pushes down on the handle the jaws clamp onto the post and raise the T-post a few inches out of the ground When he raises the handle the jaws release their grip and slide back down to a lower point on the post “You’re pulling the post straight up out of the ground exactly opposite the way it went into the ground which is the easiest way to pull a post ” says Anderson “Most other post pullers on the market pull the post out on an arc so you’re trying to push the post sideways through the ground which results in wasted energy ” “The jaws have laser-cut serrated teeth cut onto them so they grab the post really tight And they’re made from a special hard metal AR400 heat-treated abrasion resistant steel so they won’t wear down ” he adds The JackJaw® 203 sells for $195 plus S&H Contact: FARM SHOW Followup Construction Accessories Inc 3880 Haines Road Waynesville Ohio 45068 ph 937 429-9089; bob@jackjaw com or sales@jackjaw com; www jackjaw com

To read the rest of this story, download this issue below or click here to register with your account number.