How To Check Your Spark Plug's Spark

How To Check You Spark Plug s Spark FARM SHOP Handy Hints Generally if you can’t get a lawn mower to start the first thing you do is check the plug for a spark But when you pull the cord to start the mower even if there’s a spark you can’t always see it from where you’re standing Rod Mattison came up with an easy way to check the spark using a short length of electrical cord with a plug at one end and 2 alligator clips at the other “I cut the cord off an old lamp about 10 in up from the plug end separated the 2 wires in the cord and attached an alligator clip to each one I remove the spark plug from the mower and attach one of the clips to the spark plug and the other clip to the mower’s handle to serve as a ground I squeeze the prongs on the plug together about as wide as the gap in the spark plug When I pull the cord the spark jumps between the prongs and is clearly visible or I can hear it snap It works a lot better than taking the wire off the spark plug and trying to get close to the plug “I’ve used this idea for years and it works It’ll work on any engine with a spark including the engines on bigger tractors But the tool’s real niche is its use on small engines push mowers and riding mowers As long as the coil is working you’ll get a spark every time the distributor lines up with the spark plug wire ” Contact: FARM SHOW Followup Rod Mattison 134 Schell Rd Berne N Y 12023 ph 518 872-1200; mattison millie@yahoo com

To read the rest of this story, download this issue below or click here to register with your account number.