"Big Heel" Fastener Holds Wire In Place

Big Heel Fastener Holds Wire In Place FENCING Miscellaneous This new wire fastener holds the wire much better than a staple and works in the hardest posts making fence construction and repair a much faster and easier job according to the manufacturer
    Each Big Heel Fastener consists of a 1-in long 1/4-in wide aluminum alloy clip with a slot near the toe that holds the wire and a self-tapping corrosion-coated torx head screw
    The fastener can be used with all types of wires including barbed bare and electrical as well as cattle and hog panels wire netting horse fence and vineyard wires
    “It works better than anything on the market The fastener won’t pull out because the fastener’s wide body has more surface on the wire than a staple ” says inventor Vonada Comm Lincoln Kan “The high thick heel applies pressure on the holding area of the toe for a tight grip Pressure on the heel is transferred to the toe With the screw near the holding area only one screw is needed It keeps the wire so tight that it’ll hold livestock from both sides of the fence When the tie wire is broken or loose around the post you can just zip in a fastener It also makes it easy to move wires up or down on the post at any time
    “The drilling tip on the screw makes it go in easy and because of the fastener’s big heel the screw won’t bend A lot of hardwood fence posts are so hard you can’t even drive a nail or screw in The screws are corrosion protected so they won’t rust ”
    Sells for 52 cents apiece including S&H for orders of up to 2 000; for orders of more than 2 000 there’s a different price depending on the quantity ordered
    Contact: FARM SHOW Followup Big Heel Fasteners 126 West Park Lincoln Kan 67455 ph 785 524-4737 or 785 483-1685; email@bigheelfasteners com; www bigheelfasteners com

To read the rest of this story, download this issue below or click here to register with your account number.