You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
"Unstuck" Tow System For Tractors, Combines
“Pulling out a stuck tractor or combine is a lot easier and safer with our new Easy Out Pulling System. It minimizes the risk of damaging your tractor or combine and gets you out fast,” says Ben Brutlag, Brooten, Minn.
A 1 1/4-in. dia. steel cable hangs on a bracket at the front of the tractor. It runs
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Unstuck Tow System For Tractors Combines COMBINES Accessories “Pulling out a stuck tractor or combine is a lot easier and safer with our new Easy Out Pulling System It minimizes the risk of damaging your tractor or combine and gets you out fast ” says Ben Brutlag Brooten Minn
A 1 1/4-in dia steel cable hangs on a bracket at the front of the tractor It runs back under the tractor to a heavy 2 3/4-in dia pin with a cable pulley that’s housed inside a heavy metal bracket bolted onto the tractor’s frame To pull out the stuck tractor you hook up to the cable on front
Brutlag also offers a heavy-duty nylon pulling strap as an alternative to the cable The pulling strap winds up on a reel attached to the tractor’s weight bracket The strap reaches out 35 ft in front of the tractor
“It lets you pull from the heaviest and strongest part of the tractor without having to do any digging out in the mud at the back of the tractor ” says Brutlag “And you don’t have to waste time unhooking the implement ”
The Easy Out Pulling System is designed for Deere tracked tractors and 4-WD’s It will soon be available for Case IH 4-WD and Magnum tractors The cable pulling system sells for $1 850 plus S&H; the nylon strap pulling system sells for $2 500 plus S&H
Brutlag also offers an Easy-Out Pulling System for combines which sells for $1 850 plus S&H It uses a pair of 3/4-in dia cables that attach to brackets bolted onto either side of the combine’s front axle The cables come together at the back of the combine where they attach to the combine’s factory tow hook
“The system uses the combine’s tow hook but applies the majority of force to the front axle which allows the combine to be pulled out backward at an angle without the cable interfering with the rear wheels ” says Brutlag
Contact: FARM SHOW Followup Ben Brutlag 30488 Landmark Rd Brooten Minn 56316 ph 218 731-2117 or 320 808-1462; Ben@Easy-Out com; www Easy-Out com
To read the rest of this story, download this issue below or click
here to register with your account number.
