Tilt-A-Hitch Makes Trailer Loading Easy

Tilt-A-Hitch Makes Trailer Loading Easy HITCHES Lane Smith designed and built a tilting trailer hitch to load a low hot rod on his trailer The Sema award winning Tilt-A-Hitch is now sold in Austrailia Since being discovered by FARM SHOW the Tilt-A-Hitch has been seen on several TV shows It has been on Fox Sports and on ESPN and in dozens of magazines To tilt a trailer lower the trailer jack to support the load remove the blue pin crank the jack up and the trailer back tilts down for easy loading and unloading Smith initially built the Tilt-A-Hitch to haul his radical 604 cubic inch blown ’32 coupe on a trailer behind his Kenworth motor home Despite adding boards and blocks to extend the ramp the angle was too steep to load the coupe Tilt-A-Hitch solved the problem “I overbuilt the Tilt-A-Hitch to be bullet proof ” Smith says The Tilt-A-Hitch is made of 1/4 in and 5/16 in steel and mounts to any 2-in receiver It has a powder coat finish weighs 34 lbs and is rated for 8 000-lb loads Smith is offering a Christmas special until Dec 31 2010 at $129 95 + shipping Ask about the 12-volt electric jack option Smith is interested in adding more dealers Contact: FARM SHOW Followup Lane Smith Tilt-A-Hitch P O Box 27366 Knoxville Tenn 37927 ph 618 616-1790; Smithmgmt@aol com; www tiltahitch com and visit us on Facebook

To read the rest of this story, download this issue below or click here to register with your account number.