3-Pt. Mounted "Double Disc Ditcher"

3-Pt Mounted Double Disc Ditcher MISCELLANEOUS EQUIPMENT Miscellaneous Equipment My new 3-pt mounted double disc ditcher is designed to make drainage trenches and irrigation furrows The design allows you to adjust the angle of two 22-in disc blades independently to vary the width of the furrow says Karl Neudorf Cottam Ont The ditcher has a heavy-duty frame made from 6 by 4 by 1/4-in powder-coated steel tubing The 2 disc blades are positioned one behind the other and the angle of each blade can be adjusted by simply loosening a bolt The rear blade can be adjusted sideways to make a wider trench by loosening another bolt A bracket on back can be used to add tractor weights for extra ballast It lets you make a narrow furrow that s much smoother to cross over compared to trenches made by a conventional V-plow says Neudorf The rig s heavy-duty frame lets you operate the unit at faster ground speeds than a pto-operated ditcher and with less maintenance It throws the dirt far from the furrow without leaving ridges next to the furrow The ditcher comes with greaseable hubs and spindles rated at 4 500 lbs The hitch will accommodate Cat I II or III 3-pt hitches It sells for $1 995 Can plus S&H An optional front-mounted ripper shank $250 is available for hard or rocky soil conditions The shank is reversible with 2 hard-surfaced points Optional side arms $175 let you convert the ditcher to make ridges or beds for planting trees or vegetables The unit can be viewed in action on Youtube under double disc ditcher Dealer inquiries are welcome Contact: FARM SHOW Followup Karl Neudorf 8580 Concession 8 Rt 3 Cottam Ont Canada N0R 1B0 ph 519 776-9539

To read the rest of this story, download this issue below or click here to register with your account number.