You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Belt Pulley Mounts On Tractor Pto
"We use the belt pulley to saw firewood. Works great," says Warren Farley, who designed an adapter to connect a belt pulley and gearbox off an old Ford 8N tractor to the pto on an Oliver 55 tractor.
"It lets us use the tractor to pto-drive our buzz saw," he says.
The belt pulley came
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Belt Pulley Mounts On Tractor Pto POWER TAKE OFFS PTO S Power Take Offs PTO s We use the belt pulley to saw firewood Works great says Warren Farley who designed an adapter to connect a belt pulley and gearbox off an old Ford 8N tractor to the pto on an Oliver 55 tractor
It lets us use the tractor to pto-drive our buzz saw he says
The belt pulley came equipped with a cast iron gearbox that Farley hooked up directly to the Oliver s pto The gearbox is held in place by a pair of 5-in sq 1/2-in thick steel plates A 4-in long 3-in dia pipe that s welded to both plates encloses the pto One of the plates bolts to the gearbox; the other bolts to the back of the tractor in place of a pto guard that Farley removed from the tractor
It turned out good says Farley We had been using my old IH LBBR stationary engine to operate the saw but its output was only about 500 rpm s so the saw s blade ran too slow to do a good job of cutting wood The belt pulley and gearbox double the speed coming out of the tractor pto Even with the tractor barely idling the saw still runs 3 or 4 times as fast as it did before
The belt pulley and gearbox were designed to bolt directly to the Ford 8N tractor but Farley couldn t bolt them directly to the Oliver The belt pulley and gearbox are designed to take a 1 1/6-in pto shaft whereas the Oliver has a 1 3/16-in pto shaft Also the mounting bolt holes are different so the gearbox wouldn t have lined up correctly A commercial adapter to convert from 1 3/16 to 1 1/6 is available but it would have set the gearbox 4 in farther back from the tractor The 4-in long pipe makes up for the difference between the plate and adapter and makes it easier to keep tension on the flat belt so that it doesn t slip on the pulley
To see the unit in action go to Farley s Youtube page: www youtube com/wrf121
Contact: FARM SHOW Followup Warren Farley 280 State Street Jackson Ohio 45640 wrfarley@roadrunner com
To read the rest of this story, download this issue below or click
here to register with your account number.
