You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Hand-Cranked Feed Cart
"It works great in the tight quarters of our stanchion dairy barn," says Glen Schweppe, Syracuse, Neb., who built a hand-cranked feed cart.
The cart's frame, made of 1?-in. sq. tubing, is 3 ft. long, 3 ft. high and 2 ft. wide. Plywood sheets bolt to it to form the hopper. Schweppe put the upper end of an old 5-in
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Hand-Cranked Feed Cart LIVESTOCK Feeding Equipment 11-1-7 "It works great in the tight quarters of our stanchion dairy barn," says Glen Schweppe, Syracuse, Neb., who built a hand-cranked feed cart.
The cart's frame, made of 1?-in. sq. tubing, is 3 ft. long, 3 ft. high and 2 ft. wide. Plywood sheets bolt to it to form the hopper. Schweppe put the upper end of an old 5-in. dia. auger in the bottom of the cart, extending it out 10-in. on the side. A 3-in. sprocket on one end of the auger is driven by #40 roller chain off of a 4-in. sprocket on the hand crank, which doubles as a push handle for the cart. Each turn of the crank equals a set amount of feed, so Schweppe can measure feed to each animal. The cart rides on 10-in. wheels. A smaller compartment at the rear of the cart holds extra protein for top dressing by hand.
Contact: FARM SHOW Followup, Glen Schweppe, Rt. 1, Syracuse, Neb. 68446 (ph 402 269-2602).
To read the rest of this story, download this issue below or click
here to register with your account number.
