Specialists Provide All Things Hydraulic

Specialists Provide All Things Hydraulic TRACTORS Hydraulics 33-3-39 If Georgetown Hydraulics doesn't have the hydraulic equipment or component you need, they can probably make it. Their specialty is hydraulic power including everything from pumps and motors to pipes, fittings, clamps, couplers, adapters and valves. They even carry hydraulic-powered fans, chop saws, table saws and even ice cream makers. Their portable hydraulic power units are used anyplace there's a need for hydraulics and they custom build large power units to customer specifications. Put a 20 hp air compressor on a unit or an electrical generator and from 1 to 16 hydraulic pumps with outputs of 1 to 100 gallons per minute. The largest unit they have built so far was 700 hp. Georgetown offers six different diesel engine brands to choose from on the large, customized skid units. Power can also be provided by gas engines or electric motors. Smaller portable hydraulic units are also available. Self-contained, 12-volt systems start at 1.8 gpm and 3,000 psi. Prices range from $380 to $490, depending on single or double acting, manual or remote controls. Wheeled units range in price from $800 to $2,500. Engines vary from four to 24 hp with hydraulic output that starts at 6 gpm and 1,500 psi and goes to 12 gpm and 3,000 psi. Contact: FARM SHOW Followup, Georgetown Hydraulics, 343 Christiana Pike, Christiana, Penn. 17509 (ph 610 593-2753).

To read the rest of this story, download this issue below or click here to register with your account number.