1957 Self-Propelled NH Baler

1957 Self-Propelled NH Baler AG WORLD Ag World It was on the market for only one year so this is one of only a few that are still around says Bob Bowersmith Radcliff Ky about his restored 1957 New Holland SP-166 self-propelled baler     Bowersmith bought the baler in 1990 for $600 from a man who found it at a junk yard Amazingly it came complete with the owner s manual and parts book      The company built just 305 of these self-propelled units I know of only three others that still exist     The self-propelled baler was built using components from several different manufacturers For example the front end steering mechanism and wheels are off a Cockshutt tractor and the rear axle wheels and 4-speed transmission are off a Ford truck The transmission has three working gears and one road speed of about 12 mph     Two 15 hp Wisconsin engines operate the baler One drives the baler while the other handles the baling operation One alternator and one battery provide electrical service for both engines The single electrical system provides power to the starter on either engine Otherwise the two engines operate separately with separate controls for each The gas tank mounts under the driver s seat and provides fuel for both engines     The machine is fitted with a conventional New Holland baler      It draws a lot of attention says Bowersmith who takes the baler to four different farm shows every year and sometimes demonstrates it in the field Most people have never seen anything like it      I don t know why the company quit making them The driver has a great view and never has to look behind However there are some limitations The rig was designed to pull a wagon but it didn t work well on hilly ground because it didn t have enough traction Also it was somewhat expensive It sold for about $3 000 whereas the company s 66 pull-type model sold for less than $1 900 Or maybe the cost of maintaining two engines scared some people off      One person told me that because the machines didn t sell they ended up taking some of them back to the factory and converting them to pull-type models     Contact: FARM SHOW Followup Bob Bowersmith 4002 Centennial Ave Radcliff Ky 40160 ph 270 351-5013

To read the rest of this story, download this issue below or click here to register with your account number.