You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home Made Manure Pump
"It'll load a 5,000 gal. manure tank in two minutes," says Ron Bernardin, Laurier, Man. of his home-built manure pump. To build it, he used 20 ft. of 6-in. dia. grain auger with the flighting removed and a down spout attached on the end. Tubing runs from the impellor to the back of the tractor where flexible line attac
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home made manure pump MANURE HANDLING Equipment 11-1-3 "It'll load a 5,000 gal. manure tank in two minutes," says Ron Bernardin, Laurier, Man. of his home-built manure pump. To build it, he used 20 ft. of 6-in. dia. grain auger with the flighting removed and a down spout attached on the end. Tubing runs from the impellor to the back of the tractor where flexible line attaches to load the spreader.
The impellor (26-in. in dia.) is driven by a 1¢-in. dia., 20-ft. long shaft connected to the tractor's 540 rpm pto. The pump also has an agitator port mounted above it. Bernardin mounted the entire rig on a set of steel dump rake wheels.
Contact: FARM SHOW Followup, Ron Bernardin, Box 23, Laurier, Man. Canada R0J 1A0.
To read the rest of this story, download this issue below or click
here to register with your account number.
