You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Keep Wheel Rim From Bending
Chad Travis, Drasco, Ark.: "A common problem with front tractor wheel rims is that the lips can get bent, allowing dirt to get under the bead. I use my tractor in the woods to pull logs and also to run a homemade rock picker. So it gets used hard.
"To keep the rim from bending, I take the tire off the rim and t
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Keep Wheel Rim From Bending TIRES/WHEELS Miscellaneous 33-1-36 Chad Travis, Drasco, Ark.: "A common problem with front tractor wheel rims is that the lips can get bent, allowing dirt to get under the bead. I use my tractor in the woods to pull logs and also to run a homemade rock picker. So it gets used hard.
"To keep the rim from bending, I take the tire off the rim and then weld a 3/8-in. metal rod inside the lip. I weld one end in place and then bend and hammer on it as needed to fit it into place around the rim, welding as I go. This works well and can be done on most all sizes of wheels. I use a piece of string to measure how long a rod is needed.
"I had a problem with tubeless tires leaking at the bead. I solved the problem by applyng bin sealer - normally used to seal feed bins where the metal sections overlap - on the bead before inflating the tire. The sealer squeezes out when inflating the tire, so any excess material can be peeled off with a putty knife and reused. I've used this method several times with good results."
To read the rest of this story, download this issue below or click
here to register with your account number.
