You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Hand-Operated Winch On Ladder
Hauling 50-lb. packs of roofing shingles up a ladder can be hard work. To make the job easier I use a hand-operated winch attached to a board on back of the ladder. Cable from the winch leads up to a pulley on the ladder's top rung, and then back down to an L-shaped wooden carrier with a hook on top of it. Four small m
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Hand-Operated Winch On Ladder FARM HOME Miscellaneous 32-6-41 Hauling 50-lb. packs of roofing shingles up a ladder can be hard work. To make the job easier I use a hand-operated winch attached to a board on back of the ladder. Cable from the winch leads up to a pulley on the ladder's top rung, and then back down to an L-shaped wooden carrier with a hook on top of it. Four small metal trolleys on back of the carrier keep it from accidentally sliding off the side of the ladder.
I came up with this hand-pumped splitter that's powered by a standard 6-ton bottle jack. The splitter is made from 1/2-in. thick steel. The jack bolts on top of the splitting wedge. I just set a log below the wedge and pump the handle to split it. It's safer than an axe or powered splitter, and it doesn't take up much room so I can keep it handy to use whenever I have time. The jack raises nine inches. (Frank Krakow, New Albany, Ind.)
To read the rest of this story, download this issue below or click
here to register with your account number.
