Having Fun With '59 Caddies

Having Fun With 59 Caddies AG WORLD Ag World Elvis would have liked this There are a lot of things you can do with a 59 Cadillac or at least such is the case for Roger Gutschmidt and his friend Dale Donat The pair was inspired to transform seven different junkyard 59 Caddys for parts into a collector s dream of pink Cadillac fun

    Gutschmidt of Gackle N Dak did most of the work on his farm while Donat a collector from Spearfish S Dak offered up suggestions some physical help and financial compensation

    After locating the rusty beat up base units in junkyards they completely restored one using the other units for parts They painted it pink and with all that chrome Donat had a perfect parade car

    Yet the pair hated seeing what was left over go to waste so a couple of years later they turned the back end of one of their parts cars into a flashy couch and then converted the front end of the another parts car into an equally unique Pink Cadillac desk

     There were a few challenges in these projects but Dale is a real optimist and he encouraged me Gutschmidt says The cars we started with were real wrecks so the sheet metal needed to have dents taken out You had to be able to visualize what it was going to look like and get creative in problem solving

     The couch and desk each took a lot of thinking and planning Gutschmidt says The first thing we did for the couch was crudely cut off the rear end with a cutting torch about 6 in to a foot further than where the final cuts would be We did the same for the desk on the front end

    They used the original back seat for the couch but positioned it in place of the trunk and had to cut and shape the seat so it would nicely match the shape of the bumper They also reupholstered the seat with fabric from a restoration company matching what an original Caddy would have looked like

    The pair s 59 Cadillac front end desk is especially loaded with chrome since it has both a bumper and a grill All of these parts had to be re-chromed

    The desk includes about 1 ft of the front end of the hood and about 2 1/2 ft of the fender so that the front half of the wheel well is preserved To make it more portable the tires with hubcaps just lean loosely on the inside of the wheel wells

     We made sure there were no sharp edges anywhere that we cut the metal For the desktop we installed a removable piece of 3/4-in plywood with black Formica on top - it sits in a ledge just behind the hood and ahead of the fender Gutschmidt says

    Since power converters were deemed too expensive the most challenging aspect of making the desk was devising a way to have working headlights They chose to install small 110-volt bulbs inside the original lenses which in itself was a feat Their solution was to strengthen the lenses by covering them in duct tape and then delicately sandblasting a 1 1/2-in hole in the back of each of the four headlights

     They look like real headlights that way Gutschmidt points out We didn t want it to look fake

    Contact: FARM SHOW Followup Gutschmidt Manufacturing LLC Roger Gutschmidt 6651 Hwy 56 Gackle N Dak 58442 ph 701 698-2310; shopdoc@drtel net

To read the rest of this story, download this issue below or click here to register with your account number.