You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
He Rebuilds Wheel Hubs On Deere 4020 Tractors
Dale Denton, Cowden, Ill.: Dale developed a method of rebuilding the wheel hubs on Deere 4020 tractors at a fraction of the cost of new ones. It's all a case of precision matching of new holes with the original ones in the hubs. The problem happens because the threads go bad.
Denton uses 1/4 or 5/16-in. thick ste
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
He Rebuilds Wheel Hubs On Deere 4020 Tractors TRACTORS Tires/Wheels 31-4-36 Dale Denton, Cowden, Ill.: Dale developed a method of rebuilding the wheel hubs on Deere 4020 tractors at a fraction of the cost of new ones. It's all a case of precision matching of new holes with the original ones in the hubs. The problem happens because the threads go bad.
Denton uses 1/4 or 5/16-in. thick steel to build a template ring with holes that perfectly match up with the original holes in the hub. He makes the new holes between the original ones and then welds the template to the hub. He puts the template piece in a mill so that he can get a precise match - within 10 seconds of a degree. Then he's ready to drill new holes. Once the new holes are drilled he grinds off the welds that hold the template.
New replacement hubs can cost about $350, but Denton says he can rebuild them for a lot less money.
To read the rest of this story, download this issue below or click
here to register with your account number.
