You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
He Converted A 3-Pt. Mounted Boom Pole Into An 8-Ft. Long Model
I converted a 3-pt. mounted boom pole into an 8-ft. long model that lets me hook up to almost anything without getting off the tractor. The boom is equipped with a chain hook and also a 2 5/16-in. ball at one end, and a 2-in. ball that mounts on an adjustable length boom located under the pole. The chain has a couple o
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
He Converted A 3-Pt. Mounted Boom Pole Into An 8-Ft. Long Model TRACTORS Accessories 31-2-41 I converted a 3-pt. mounted boom pole into an 8-ft. long model that lets me hook up to almost anything without getting off the tractor. The boom is equipped with a chain hook and also a 2 5/16-in. ball at one end, and a 2-in. ball that mounts on an adjustable length boom located under the pole. The chain has a couple of J-hooks on it, which I use to lift equipment. I use the 2 5/16-in. ball on top of the pole to move gooseneck trailers, and the 2-in. ball to move tag-along trailers.
The pole was originally 6 1/2 ft. long and was equipped with a small metal loop to hook a chain into. I cut 2 ft. off the pole. Then I slid a length of larger diameter heavy tubing over the original tubing and welded it on.
The adjustable length boom that supports the 2-in. ball is made from 1 1/2-in. dia. tubing that rides over 1 1/4-in. tubing, with holes drilled in both pieces to drop a pin into. (Lamar Reynolds, Hogansville, Ga. ph 706 637-6037)
To read the rest of this story, download this issue below or click
here to register with your account number.
