You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
3-Pt. Mounted Log Splitter
Leonard Seltzer, Manhattan, Ill., used an old railroad rail to build a 3-pt. mounted log splitter.
The rail serves as the splitter's main beam and is turned upside down. A single blade with spreader fins welds in place at the far end of the rail, and a vertical metal bracket that attaches to the 3-pt. is wel
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
3-Pt. Mounted Log Splitter WOODLOT EQUIPMENT Wood Splitters 30-6-16 Leonard Seltzer, Manhattan, Ill., used an old railroad rail to build a 3-pt. mounted log splitter.
The rail serves as the splitter's main beam and is turned upside down. A single blade with spreader fins welds in place at the far end of the rail, and a vertical metal bracket that attaches to the 3-pt. is welded to the other end. The bracket supports a 4 by 24-in. hydraulic cylinder attached to a 2-in. ram, as well as a control valve. The cylinder operates off tractor hydraulics.
To use the splitter, Seltzer simply lowers the rail to ground level.
"I built it in 1979 and have used it to split a lot of logs. It'll take logs up to 20 in. long," notes Seltzer.
Contact: FARM SHOW Followup, Leonard Seltzer, 16040 W. Elmwood, Manhattan, Ill. 60442 (ph 815 478-3578).
To read the rest of this story, download this issue below or click
here to register with your account number.
