Gauge Made For Circular Sawhill

Gauge Made For Circular Sawhill WOODLOT EQUIPMENT Woodlot Equipment 30-5-41 Here's a photo of a gauge I made for my circular sawmill. The original gauge and "set works" was hard to read and you looked at it at an angle. You can now look at it straight without bending over. The parts needed are the bottom of a 5-gal. pail, two pillowblock bearings, two bicycle sprockets with a 2 to 1 ratio, a bicycle chain, a shaft, a small V-pulley, a collar on the sawmill shaft, and a set screw for fine tuning. Works great. (Loren Lindsay, 52621 Valley View Circle N., Mankato, Minn. 56003)

To read the rest of this story, download this issue below or click here to register with your account number.