You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
New Fix For Deere Combines
If you own a Deere 9000 series combine, chances are you've had problems with the concave adjustment actuator rod. If the rod bends or the nut pulls out, you've got to replace the entire actuator motor, and that can get expensive.
In Canada, the cost is about $900 not including labor and down time. That's why a c
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
New Fix For Deere Combines COMBINES Maintenance 30-1-37 If you own a Deere 9000 series combine, chances are you've had problems with the concave adjustment actuator rod. If the rod bends or the nut pulls out, you've got to replace the entire actuator motor, and that can get expensive.
In Canada, the cost is about $900 not including labor and down time. That's why a customer who had to replace the actuator three times, asked Mark Petty, a repair shop operator in Blackstock, Ontario, to find an alternative.
Petty created a thicker stainless steel rod with a bronze nut that fits into the motor. "It's a permanent solution to the problem," he says.
It takes about an hour to replace the piece. "It's not hard to do."
Petty says the original piece, made by Warner Electric, may have been put on other combines, but he doesn't know which ones. "Up here, Deere is the most common combine." He says newer Deere machines don't have the problem.
Sells for $240 (Can.) plus S&H.
Contact: FARM SHOW Followup, Mark Petty, 2850 Church St., Blackstock, Ontario L0B 1B0 Canada (ph 905 986-1521; mpetty@3web.net).
To read the rest of this story, download this issue below or click
here to register with your account number.
