You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Cordless Drill Powers Calf "Tube Feeder"
"It's a handy little tool that greatly speeds up the job of feeding baby calves," says Doug Fluit, Lynden, Wash., who uses an electric drill to "tube feed" calves.
Fluit uses buckets to feed milk to about 300 baby calves each year. Whenever a calf refuses to drink he has to feed it by sticking a tube down its th
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Cordless Drill Powers Calf "Tube Feeder"
FARM SHOP Tools 29-6-29 "It's a handy little tool that greatly speeds up the job of feeding baby calves," says Doug Fluit, Lynden, Wash., who uses an electric drill to "tube feed" calves.
Fluit uses buckets to feed milk to about 300 baby calves each year. Whenever a calf refuses to drink he has to feed it by sticking a tube down its throat. Using gravity, it took 5 to 7 min. per calf, and the job had to be done 3 or 4 times a day.
To speed up the process, he uses a cordless drill to shaft-drive a small pump. A 5-ft. long plastic hose with a metal tube at the end is attached to one side of the pump. A 1-ft. length of curved copper pipe hooks up to the other side of the pump and serves as a suction line. To feed a calf, he simply puts the suction line in the bucket and inserts the tube down the calf's throat, then starts the drill.
"It takes only about 30 seconds to feed each calf, so now I can do 8 to 10 calves in only about 10 minutes. It used to take 45 minutes to an hour," says Fluitt. "The pump can be bought at any hardware store."
Contact: FARM SHOW Followup, Doug Fluit, 2003 Bangbron Road, Lynden,Wash.
To read the rest of this story, download this issue below or click
here to register with your account number.
