You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Tool Solves Depth Stop Problem On Drill Press
M. Hochstetler, 174 Vogel Rd., Cumberland, Va. 23040 ph 804 492-4295: "I never used the depth stop on my drill press much because it took too long to adjust. To solve the problem I found a nut that would fit the adjustment bolt and welded it between the jaws of a spring clamp. Then I sawed the nut in half. To adjust th
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Tool Solves Depth Stop Problem On Drill Press FARM SHOP Tools 27-1-36 M. Hochstetler, 174 Vogel Rd., Cumberland, Va. 23040 ph 804 492-4295: "I never used the depth stop on my drill press much because it took too long to adjust. To solve the problem I found a nut that would fit the adjustment bolt and welded it between the jaws of a spring clamp. Then I sawed the nut in half. To adjust the depth stop I just lower the spindle on the drill press and slip the nut in place onto the adjusting bolt. It eliminates the need to run the nut up or down the adjusting bolt.
"I ran PVC air lines in my shop with several outlets. I hooked a portable air tank up to one of the outlets. Since the air tank had a female fitting on the hose with an automatic cut-off, I don't lose pressure on the line whenever I unhook it. The portable tank is always full when I need it."
To read the rest of this story, download this issue below or click
here to register with your account number.
