You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Auger Straightener Tool Makes Use Of Ordinary Scissors Car Jack
Isaac Temple, 12738 Covell Rd., Morrison, Ill. 61270 (ph 815 772-2453): Dented augers aren't much of a problem for Isaac since he came up with a simple straightener tool that makes use of an ordinary scissors car jack. He made a round flat base for the jack by welding an 8-in. dia. steel plate to the bottom it, then ca
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Auger Straightener Tool Makes Use Of Ordinary Scissors Car Jack AUGERS Augers (29B) 27-2-38 Isaac Temple, 12738 Covell Rd., Morrison, Ill. 61270 (ph 815 772-2453): Dented augers aren't much of a problem for Isaac since he came up with a simple straightener tool that makes use of an ordinary scissors car jack. He made a round flat base for the jack by welding an 8-in. dia. steel plate to the bottom it, then capped the top of the jack by welding on a 4-in. sq. steel plate.
To straighten out dents, he first measures the distance from the end of the auger tube to the dent. Let's say it's 8 ft. He slips a long pipe over the jack handle, measures from the jack, and marks it at 8 ft. Then he slides the jack into the tube until the mark on the pipe is flush with the end of the tube, with the jack directly below the dent. He pumps the pipe handle until the plate on top of the jack pushes up against the bottom side of the dent. Then he uses a hammer to lightly tap all the way around the dent.
"The tapped area pops back up and won't ever bend back down again," says Temple.
To read the rest of this story, download this issue below or click
here to register with your account number.
