Chopped Suburban Makes Great Short Box Pickup

Chopped Suburban Makes Great Short Box Pickup PICKUPS Miscellaneous 28-3-4 After parking his 1990 Suburban next to a short box 4-door pickup one day, Stephen C. Weisbrod started thinking. "The Suburban rear flooring and sidewalls looked just like a pickup box," he notes. "So I cut off the back half of the roof behind the second seat." Weisbrod then took part of a Chevy pickup cab of the same vintage and sliced the back of the cab off, from roof to floor. It fit the back of the Suburban perfectly and was soon welded in place. The sidewalls and tailgate on the Suburban were capped with sheet metal. Then the unit was repainted. After mounting a home-built 3-pt. hitch and pto on front of the Suburban, Weisbrod pulled the 6-cylinder engine with belt- driven governor and automatic transmission out of the Chevy pickup he had already sliced up. Along with the battery and gas tank, all the components were mounted on a skid and set in the back of the Suburban with all the controls mounted inside the cab. A shaft shielded with 3/16-in. steel was then run through the passenger and engine compartments of the Suburban to drive a snowblower. "This way the snowblower is totally independent of the Suburban engine," explains Weisbrod. "I start up the engine on the skid and once it gets up to speed, the snow blower starts working. "I paid $2,000 for the Chevy pickup and spent less than $1,000 for modifications to the Suburban. It took about 150 hours," recalls Weisbrod. "It looks a lot like a new Avalanche. I can put a regular pickup toolbox in it and an econo cover over it. Now I'm beating up a $6,000 pickup instead of a $60,000 tractor when blowing snow." Contact: FARM SHOW Followup, Stephen C. Weisbrod, R.D. 3, Box 99, Canastota, N.Y. 13032 (ph 315 655-3821)

To read the rest of this story, download this issue below or click here to register with your account number.