You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
"Service Rack" For Garden Tractors
"It puts everything up high enough that I can service it easily," says Harold Davis, Trenton, Tenn., about the service rack he built for his Deere garden tractor equipped with a 60-in., belly-mount mower.
The service rack is made from 1 1/2-in. steel tubing and 1 1/2-in. angle iron. It consists of a 4-ft. wide,
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
"Service Rack" For Garden Tractors FARM SHOP Repairs 28-4-36 "It puts everything up high enough that I can service it easily," says Harold Davis, Trenton, Tenn., about the service rack he built for his Deere garden tractor equipped with a 60-in., belly-mount mower.
The service rack is made from 1 1/2-in. steel tubing and 1 1/2-in. angle iron. It consists of a 4-ft. wide, 8-ft. long rectangular frame mounted on four 25-in. high legs. A pair of 8-ft. long ramps attaches to one end and a 12-in. high metal bar acts as a "stop". A pair of 12-in. wide sliding ramps can be placed anywhere inside the frame to accommodate smaller tractors or ATVs. A ladder can be attached to either side of the rack.
"I recently bought a new Deere X495 garden tractor, and it's a lot easier to remove the deck when it's up in the air," says Davis. "By placing a piece of plywood on top of the frame, I can convert it into a work table," notes Davis, adding that the ramps can also be used to load tractors or ATVs into a pickup.
He's looking for a manufacturer.
Contact: FARM SHOW Followup, Harold Davis, 5 Sally T. Cooper Road, Trenton, Tenn. 38382 (ph 731 855-9946; email: 20hdavis@bellsouth.net).
To read the rest of this story, download this issue below or click
here to register with your account number.
