You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Slick 3-Pt. Mounted Post Puller
"My 3-pt. mounted post puller really works great," says Brad Smidt, Lennox, S. Dak.
The post puller was built from a hitch off an old anhydrous ammonia applicator, and some heavy railroad track angle iron. It consists of a steel jaw that's hinged in the middle and is attached to a hydraulic cylinder. Extending t
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Slick 3-Pt. Mounted Post Puller FENCING Miscellaneous 28-4-20 "My 3-pt. mounted post puller really works great," says Brad Smidt, Lennox, S. Dak.
The post puller was built from a hitch off an old anhydrous ammonia applicator, and some heavy railroad track angle iron. It consists of a steel jaw that's hinged in the middle and is attached to a hydraulic cylinder. Extending the cylinder closes the jaw around a post. The 3-pt. is then raised to lift the post out of the ground.
"It works a lot better than having someone else walk alongside to wrap a chain on the post. That can be a very tiring job when you have miles of fence posts to pull out," says Smidt. "I've used this idea for 1 1/2 years. It will also work on wooden posts, too, if they're small enough to fit into the jaw area. The main thing is to build it heavy because there's a lot of pull on the jaw area, especially with old posts that have been in the ground for 80 to 100 years."
Contact: FARM SHOW Followup, Brad Smidt, 27985 468th Ave., Lennox, S. Dak. 57039 (ph 605 647-5060).
To read the rest of this story, download this issue below or click
here to register with your account number.
