You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Old Silo Blower Turned Into "Feed Thrower"
"We use it to throw feed for storage into a lean-to alongside our free-stall barn," says dairyman Glen Schweppe, Syracuse, Neb., who converted an old Allis-Chalmers silo blower - equipped with an 11-ft. long conveyor - into a "feed thrower".
Schweppe's lean-to is located at one end of his barn. He uses a skid st
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Old Silo Blower Turned Into "Feed Thrower" SILOS Silos 27-1-11 "We use it to throw feed for storage into a lean-to alongside our free-stall barn," says dairyman Glen Schweppe, Syracuse, Neb., who converted an old Allis-Chalmers silo blower - equipped with an 11-ft. long conveyor - into a "feed thrower".
Schweppe's lean-to is located at one end of his barn. He uses a skid steer loader to scoop feed out of the lean-to and dump it into bunks inside the barn. The problem was that he recently bought a Schuler vertical mixer wagon to replace his older Ryan feed wagon, which was equipped with an endless conveyor and had been used to dump feed into the lean-to. However, the new wagon is too tall to fit inside the barn.
"We back the mixer up to our feed thrower conveyor and use tractor hydraulics to power a hydraulic motor that we installed on it. We can make the pile as big as we want by using a crank to change the angle of the conveyor. It'll throw feed up to 10 ft.," says Schweppe.
He bought the silo blower at a farm sale for $22. He removed the blower and narrowed up the wheels and axle, then moved them under the center of the conveyor. He also built an undercarriage for the conveyor and added a crank-operated cable so that he can change the angle of the conveyor. He mounted a hydraulic motor at one end of the conveyor and a hitch at the other end, allowing him to pull the unit behind his tractor or 4-wheeler.
"We built it last winter and started using it this spring with no problems," says Schweppe. "The conveyor was originally equipped with a flat belt which wasn't able to move enough feed at the angle we used the conveyor. We replaced the flat belt with a new diamond belt which we bought for $300. The conveyor is so well balanced that we can pick it up and move it around by hand.
"The feed that we deliver into the lean-to is a mix of corn and hay silage and dry hay."
Contact: FARM SHOW Followup, Glen Schweppe, 1355 S. 32rd, Syracuse, Neb. 68446 (ph 402 269-2602).
To read the rest of this story, download this issue below or click
here to register with your account number.
