You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Cheap Bale Trailer Made From Old Truck Frame
If you need an inexpensive round bale trailer you can pull behind a pickup, you might want to take a look at the simple trailer built by Gordon Marshalek.
Marshalek, of Raymond, Nebraska, stripped the engine, transmission, cab, bed, and rear end off the frame of a 1972 F-600 Ford straight truck. He removed the f
.......... You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Cheap Bale Trailer Made From Old Truck Frame BALE HANDLING Bale Handling (31B) 26-5-27
If you need an inexpensive round bale trailer you can pull behind a pickup, you might want to take a look at the simple trailer built by Gordon Marshalek.
Marshalek, of Raymond, Nebraska, stripped the engine, transmission, cab, bed, and rear end off the frame of a 1972 F-600 Ford straight truck. He removed the front steering axle and reattached it about 6 ft. from the back of the frame. Then he welded the tie rods solid so the front wheels wouldn't swivel.
He pulled the I-beams together at the front of the truck frame to make a tongue and welded on a ball hitch to fit the receiver hitch of his pickup.
To make a better cradle for the bales to sit on, he fastened two lengths of 6-in. channel iron alongside the truck frame channel irons. The resulting single axle trailer, which cost less than $200 to make from salvage parts, will hold six bales. Marshalek figures it only took five or six hours to make.
Contact: FARM SHOW Followup, Gordon Marshalek, Rural Route, Box 191, Raymond, Neb. 68428 (ph 402 783-3801).
To read the rest of this story, download this issue below or click
here to register with your account number.