You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built Stand For Powered Bandsaw
Stan McDonald, Foxboro, Ont.: "Like other FARM SHOW readers, I like to build the things I need. That often means cutting flat bars, channel iron, and so on. So I bought a powered bandsaw. The problem I ran into is that the blade on the small imported saw did not last long due to the lack of coolant. Also, the stand
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built Stand For Powered Bandsaw FARM SHOP Miscellaneous 25-5-38 Stan McDonald, Foxboro, Ont.: "Like other FARM SHOW readers, I like to build the things I need. That often means cutting flat bars, channel iron, and so on. So I bought a powered bandsaw. The problem I ran into is that the blade on the small imported saw did not last long due to the lack of coolant. Also, the stand was flimsy. I guess you get what you pay for.
"So I built my own stand from square tubing which allows me to add coolant as I cut. The stand cost $125, not including the expense of a coolant pump. I figure the investment will pay for itself by extending the life of blades about 5 times. I've also noted that using bi-metal blades also increases blade life, when compared with dry cutting."
To read the rest of this story, download this issue below or click
here to register with your account number.
