You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built Small Round Feeder
I made this small round feeder, which is big enough to take care of a few head of livestock. I took an old combine wheel, and made two rings 3/16-in. thick by 3 in. wide and 27 1/2 in. in diameter. Those rings formed the top and bottom of my feeder. I made uprights out of 1/2-in. conduit, which I flattened at each
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built Small Round Feeder BALE HANDLING Bale Handling (31B) 24-5-34 I made this small round feeder, which is big enough to take care of a few head of livestock. I took an old combine wheel, and made two rings 3/16-in. thick by 3 in. wide and 27 1/2 in. in diameter. Those rings formed the top and bottom of my feeder. I made uprights out of 1/2-in. conduit, which I flattened at each end and welded in place 5 in. apart. I made an extra support for each side out of 3-in. strap iron, and mounted a chick brooder on top to keep rain off the hay. I put a steel cover from a 50-gal. barrel on top of the wheel to keep hay from dropping down through.
The feeder works great and is strong enough to last a long while. I left the tire on to keep animals from getting bruised against the feeder. (Loyal Hanson, 1584 Hwy S, Sturgeon Bay, Wis. 54235)
To read the rest of this story, download this issue below or click
here to register with your account number.
