You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Bolt Rack Made Using Gangs Off Old Disk
Wayne Zimmer, Roblin, Manitoba: "Here's a photo of a bolt rack that I made using gangs off an old disk. I can turn it to any position and find anything I want at a glance. I removed the gangs and welded short lengths of angle iron to the bearing holders on all the gangs. I welded two gangs to a pipe opposite each other
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Bolt Rack Made Using Gangs Off Old Disk FARM SHOP Parts 24-4-41 Wayne Zimmer, Roblin, Manitoba: "Here's a photo of a bolt rack that I made using gangs off an old disk. I can turn it to any position and find anything I want at a glance. I removed the gangs and welded short lengths of angle iron to the bearing holders on all the gangs. I welded two gangs to a pipe opposite each other. The next two gangs are welded opposite each other but are lower than the two gangs welded to the pipe. The stand that holds the rack upright is the rear wheel of a disker which has weights on it.
"The entire rack revolves, which means I can move all four gangs at once, or move each gang one at a time."
To read the rest of this story, download this issue below or click
here to register with your account number.
