You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Tool For Replacing U-Joints On Ag Power Shafts
Robert E. Sanner, York, Neb.: "To replace U-joints on ag power shafts and some automotive shafts, I've found a conventional vice works best. I made this tool that hangs on a vice and leaves both hands free. It consists of two pieces of strap iron 5 in. long by 1 in. wide. You bend them over with a hammer to fit t
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Tool For Replacing U-Joints On Ag Power Shafts POWER TAKE OFFS (PTO'S) Power Take Offs (PTO's) 24-4-38 Robert E. Sanner, York, Neb.: "To replace U-joints on ag power shafts and some automotive shafts, I've found a conventional vice works best. I made this tool that hangs on a vice and leaves both hands free. It consists of two pieces of strap iron 5 in. long by 1 in. wide. You bend them over with a hammer to fit the jaws of the vice. Then weld a 1 1/4-in. nut on one side and a 3/4-in. dia. by 1/2 in. long rod on the other side. It works best to put the nut on the front side of the vice. I've never seen a tool like this in any service catalog but it works good."
To read the rest of this story, download this issue below or click
here to register with your account number.
