You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Crowbar Straddles Studs
You can peel up floorboards, pull off roofing, or take off paneling with minimal damage using this new-style crowbar that straddles the stud.
The "Gerry Bar" is equipped with a pair of steel prongs that lift material from underneath in a single motion. The tips of the prongs are blunt to minimize damage. It lift
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Crowbar Straddles Studs FARM SHOP Tools 23-4-8 You can peel up floorboards, pull off roofing, or take off paneling with minimal damage using this new-style crowbar that straddles the stud.
The "Gerry Bar" is equipped with a pair of steel prongs that lift material from underneath in a single motion. The tips of the prongs are blunt to minimize damage. It lifts straight up to reduce damage and since the upward lifting force is equal on both sides of the nails or screws, the fastener comes straight out.
Available in two styles. Model 70 has sharply-angled prongs for general use, while model 140 has more open 140 degree prongs that make it easier to work near the edge of a floor, wall, or ceiling. This model can also be used to hold a warped stud straight while framing. Both models work on studs up to 2 in. wide. The handle is 26 in. long.
An optional T-handle allows the user to apply even greater leverage.
Each model sells for $39.95 plus $8.25 per bar for S&H. Sharpened forks are available and sell for $8.25 plus S&H. The T-handle sells for $7.25 (includes S&H).
Contact: FARM SHOW Followup, Hard-To-Find Bolts, 1537 North Point, Oshkosh, Wis. 54901 (ph 888 236-9013; fax 9014).
To read the rest of this story, download this issue below or click
here to register with your account number.
