You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Modified 940's International H Tractor
Here's a 1940's International H tractor we've had around for years and modified in a couple ways to better meet our needs.
First, we changed the pto from the rear to the right side. We did so by removing the belt pulley and installing a splined pto shaft in its place. This way it's easier to connect to the 10-in
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Modified 940's International H Tractor TRACTORS Modifications 23-2-36 Here's a 1940's International H tractor we've had around for years and modified in a couple ways to better meet our needs.
First, we changed the pto from the rear to the right side. We did so by removing the belt pulley and installing a splined pto shaft in its place. This way it's easier to connect to the 10-in. dia., 22-ft. bin unloading auger we use.
We also upgraded to live hydraulics. We equipped it with a heat exchanger for cooling the oil behind the radiator. We also fashioned an additional 5-gal. oil reservoir in addition to the belly-mounted tank. The upgrade makes the system more suitable for use with our hopper auger and, because it's live, you don't lose hydraulics whenever you use the clutch. (Charles Goodall, R.R. 2, Box 84, Sidell, Ill. 61876; ph 217 288-9523)
To read the rest of this story, download this issue below or click
here to register with your account number.
