You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built Metal Bolt Bins Mount On Shop Wall
Joel Waldner, Lethbridge, Alberta: "We made shelves that keep steel tubing, rods, and angle iron neat and organized in our shop. A series of steel pipes runs from ceiling to floor with 16-in. long steel rods welded onto each side of the pipes.
"A 5 by 12-ft. steel table on caster wheels works great for welding jo
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built Metal Bolt Bins Mount On Shop Wall FARM SHOP Miscellaneous 22-4-38 Joel Waldner, Lethbridge, Alberta: "We made shelves that keep steel tubing, rods, and angle iron neat and organized in our shop. A series of steel pipes runs from ceiling to floor with 16-in. long steel rods welded onto each side of the pipes.
"A 5 by 12-ft. steel table on caster wheels works great for welding jobs and saves on one's back. We used 2-in. sq. tubing to make the frame and welded a sheet of 3/16-in. thick steel on top.
"We make our own metal bolt bins to mount on the wall of our shop. They're 5 ft. high and 10 ft. long and there are 10 rows of bins. To make a bin, we bend a length of sheet metal 90 degrees in the middle to form an L-shaped trough. Then we weld on the sides and weld in triangle-shaped steel partitions every 5 in. These bins are built much sturdier than commercial bolt bins."
To read the rest of this story, download this issue below or click
here to register with your account number.
