You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built 3-pt. Round Bale Mover
My home-built 3-pt. round bale mover can lift round bales up to 12 ft. high. Lets me stack bales three high inside my buildings.
The unit is equipped with two 4 by 24-in. cylinders that raise or lower the load and a 3 by 18-in. tilt cylinder that levels it. The lift arm is fitted with two spikes at the bottom and
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built 3-pt. Round Bale Mover BALE HANDLING Bale Handling (31B) 22-4-36 My home-built 3-pt. round bale mover can lift round bales up to 12 ft. high. Lets me stack bales three high inside my buildings.
The unit is equipped with two 4 by 24-in. cylinders that raise or lower the load and a 3 by 18-in. tilt cylinder that levels it. The lift arm is fitted with two spikes at the bottom and two smaller spikes on top. I used 3 by 4-in. steel tubing to build the main frame and spent a total of about $700. Similar commercial models sell for $3,000 or more and aren't built as well as mine. The lower lift arms on my bale mover remain in the resting position when-ever the bale is lowered and whenever I'm going to or from the field. Most of the weight is directly on the 3-pt.'s upper link. There isn't much weight on the lower cylinders which results in less stress on the lower lift arms.
(Larry Morn, N6513 Biggs Rd., Argyle, Wis.
To read the rest of this story, download this issue below or click
here to register with your account number.
