You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
"Poor Man's" Plasma Torch
Here's the "poor man's" answer to conventional oxyacetylene, air-carbon and plasma-arc torches.
The "MagnumFusion" torch uses special plasma tubes to generate a 10,000-degree ionized particle stream capable of quickly vaporizing any solid material, including rock and cement.
"You can remove 1 linear foot of
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
"Poor Man's" Plasma Torch WELDERS/TORCHES Welders/Torches 22-3-27 Here's the "poor man's" answer to conventional oxyacetylene, air-carbon and plasma-arc torches.
The "MagnumFusion" torch uses special plasma tubes to generate a 10,000-degree ionized particle stream capable of quickly vaporizing any solid material, including rock and cement.
"You can remove 1 linear foot of 3/4-in. weld in 12 seconds," says the company. "You can pierce 24-in. thick steel in 5 minutes, pins p in 15 minutes. Bore a 24-in. linear hole through rock or cement in 15 minutes."
The system's tubes bend or extend for access into tight places, and produce no toxic gas, carbon, smoke, noise or arc flash. Using the system requires no surface preparation, eliminates collateral heat damage to surfaces, requires no power source (it runs on oxygen and the consumable tube) or compressors and is maintenance-free, having only one moving part. Portable and shop models are available. They sell for $549 and $1,049, respectively, including complementary lasma tbes Replacement tubes range from 92 cents to $3.50 per tube. Contact: FARM SHOW Followup, Magnum Manufacturing Incorporated, 11030 Arrow Route # 103, Rancho Cucamonga, Calif. 91730 (ph 909 484-0985; fax 0785; website www.MagnumUSA.com).
To read the rest of this story, download this issue below or click
here to register with your account number.
