You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Air-Powered Post Driver Puts In 50 T-Posts Per Hour
You can drive 50 or more T-posts per hour in even the toughest ground with this new air-powered post driver from C & G Tools.
The Ovis Ram post driver weighs only 39 lbs., light enough for one man to operate all day with minimal fatigue, the company says. The 26-in. long ram is triggered automatically as you set
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Air-Powered Post Driver Puts In 50 T-Posts Per Hour FENCING Tools 22-2-10 You can drive 50 or more T-posts per hour in even the toughest ground with this new air-powered post driver from C & G Tools.
The Ovis Ram post driver weighs only 39 lbs., light enough for one man to operate all day with minimal fatigue, the company says. The 26-in. long ram is triggered automatically as you set the unit onto the top of the post. A pair of small dia. air cylinders brings the ram down with a hammer-like blow.
It works off a small air compressor with at least 6 cfm's at 60 to 80 psi's.
"It'll drive a post into frozen or extremely rocky ground. It'll even drive a post through asphalt," says John C. Crighton of C & G Tools.
Works on all three standard size T-posts, and adapters are available to use on round posts up to 2 1/2-in. in dia.
Sells for $895. An industrial model, which is 40 percent more powerful, sells for $1,195. The company also makes a manual post-pulling tool. Sells for $50.
For more information, contact: FARM SHOW Followup, C & G Tools Inc., 3002 W. Kildee Lane, Springfield, Mo. 65810 (ph 417 890-5761; fax 886-9563).
To read the rest of this story, download this issue below or click
here to register with your account number.
