You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Dolly Helps HimPut Plane In Shop
When Bob Ellis put up a new shop a few years ago, he decided to convert his old shop into a hangar for his restored 1946 Aeronca Champ airplane. The problem was, the old shop had a 24-ft. wide door and the plane had a 36-ft. wingspan.
"The only way the plane would fit through the door was sideways and landing gea
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Dolly Helps HimPut Plane In Shop FARM SHOP Miscellaneous 22-1-19 When Bob Ellis put up a new shop a few years ago, he decided to convert his old shop into a hangar for his restored 1946 Aeronca Champ airplane. The problem was, the old shop had a 24-ft. wide door and the plane had a 36-ft. wingspan.
"The only way the plane would fit through the door was sideways and landing gear wheels don't turn sideways," says the Dana, Ind., farmer.
So Ellis built a ramp/dolly system out of odds and ends that allows him to roll the plane in through the door with ease.
It consists of a main frame made of two 8-ft. lengths of 3-in. dia. steel pipe. Ramps made from a 6-ft. International truck bumper cut in half, weld to each end, as do four dolly wheels which came off a Deere cultivator. The wheels on one end of the dolly pivot on a pin like a fifth wheel hitch. That's so the airplane can be finessed into place once it's inside the hangar.
Contact: FARM SHOW Followup, Bob Ellis, 460 S. State Road 71, Dana, Ind. 47847 (ph 217 666-3557).
To read the rest of this story, download this issue below or click
here to register with your account number.
