You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Shop-Built Jig Lets Him Replace Sickle Sections Without Removing Entire Sickle Bar
The tool consists of a 2-ft. high stand with a wide base that keeps it from sinking into the ground when it's used to brace the sickle.
Michael Foster, Ipswich, Suffolk, U.K.: Foster's shop-built jig allows him to replace sickle sections without removing the entire sickle bar. "It's saved us a great deal of time
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Shop-Built Jig Lets Him Replace Sickle Sections Without Removing Entire Sickle Bar FARM SHOP Tools 21-6-31 The tool consists of a 2-ft. high stand with a wide base that keeps it from sinking into the ground when it's used to brace the sickle.
Michael Foster, Ipswich, Suffolk, U.K.: Foster's shop-built jig allows him to replace sickle sections without removing the entire sickle bar. "It's saved us a great deal of time and frustration, particularly in a difficult harvest when sickle sections are easily dam-aged," he says.
A 9-in. long sq. bar welds to the top of the stand. It's fitted with two short lengths of square bar that serve as "anvils". They are positioned to match up with the rivet spacing on the sickle sections. At the top of each "anvil", a dimple is drilled for the rivet head to fit into.
You first grind off old rivets, remove the broken blade and then replace the blade and re-rivet. Lower the header until the blade rests on the jig and flatten the rivets against the little anvils. Be careful not to lower the header too much or the weight will damage the blade, he notes.
To read the rest of this story, download this issue below or click
here to register with your account number.
