You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Swather Converted To Forklift, Rock Picker
When Jim Seymour decided he needed some-thing more agile than the tractor loader he used to move bales around his farm, he came up with a forklift that turns on a dime and handles square bales with ease.
"It's got a 9-ft. turning radius so it maneuvers like a charm around the poles," says the Cavan, Ontario, dair
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Swather Converted To Forklift, Rock Picker SWATHERS Swathers 21-4-25 When Jim Seymour decided he needed some-thing more agile than the tractor loader he used to move bales around his farm, he came up with a forklift that turns on a dime and handles square bales with ease.
"It's got a 9-ft. turning radius so it maneuvers like a charm around the poles," says the Cavan, Ontario, dairy farmer. "It also stacks bales up to 15 ft. high."
He started with an International 201 swather equipped with a 42 hp C-135 engine, stripping it down to the frame and shortening the rear end 3 ft. to give it a 5-ft., 6-in. wheelbase.
The swather's single rear caster wheel was removed and replaced with a caster wheel on each side for better stability when loaded. One of the wheels was the original swather wheel, the other came off a New Holland swather.
Seymour fitted the swather with a heavy-duty mast off a junked forklift. It operates off a 4-in. dia. cylinder on front of the swather. He uses a single 25 gpm hydraulic pump out of an old dump truck to raise and lower the lift.
As a precaution to keep sparks from igniting hay or dust, the engine's exhaust pipe is diverted through a baffle around the fuel tank that's filled with water.
To lift bales up to 15 ft. high, Seymour built a quick-tach bale fork. It's fitted with four 27-in. long prongs made from 1 3/8 in. steel tubing.
"You'd only need three prongs to handle our 38-in. sq., 6-ft. long bales," he says, "but I believe in over-building things rather than under-building them."
Seymour used the forklift to handle 400 bales last year. He says it performed flawlessly, requiring only a few minor modifications for its second season.
He also uses the lift to pick rocks by mounting a commercial rock picker bucket on front.
Out-of-pocket expense was about $3,000 (Canadian).
Contact: FARM SHOW Followup, Jim Seymour, Idylwilde Farms Ltd., 1688 Stewart 12th Line, R.R. 3, Cavan, Ontario, Canada LOA 1CO (ph 705 742-4449; fax 8899).
To read the rest of this story, download this issue below or click
here to register with your account number.
