You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Self-Propelled Splitter Makes Firewood Fast
Building a self-propelled wood splitter solved many of the problems inventor Lloyd Williamson had experienced over the years with commercial pull-type splitters.
"I designed and built this go-anywhere splitter for convenience," explains Williamson, Luther, Okla. "It allows me to travel through the woods at up to
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Self-Propelled Splitter Makes Firewood Fast WOODLOT EQUIPMENT Wood Splitters 21-4-2 Building a self-propelled wood splitter solved many of the problems inventor Lloyd Williamson had experienced over the years with commercial pull-type splitters.
"I designed and built this go-anywhere splitter for convenience," explains Williamson, Luther, Okla. "It allows me to travel through the woods at up to 17 mph and it holds wood at a comfortable height so it's not so hard on the back."
Williamson started with the frame of a Ford Courier pickup equipped with 4-speed transmission. He replaced the wrecked front end and steering system with one off a Ford Pinto car. To power the splitter, he mounted a 40 hp Wisconsin engine out of a Versatile 100 swather up front. Its drive shaft belt-drives the pickup transmission with a 2.8 to 1 gear reduction.
A belt-driven 20 gpm hydraulic pump mounts on the pickup frame near the right front wheel. It powers the splitter's home-built 6 1/2-in. dia. cylinder with 29-in. stroke. The cylinder is welded to a length of 8 by 6 1/2-in. I-beam, which slides out on a track to extend 4 ft. past the tailgate for splitting.
Hydraulic oil is contained in a 10-gal. reservoir Williamson fashioned out of the pickup's fuel tank.
The splitter's wedge, which flares out to 6 1/2 in. wide, is made from a piece of I-beam. It pushes against a "backstop" made from pieces of plow beam. "I had to build it strong because the cylinder produces over 50,000 lbs. of force," Williamson notes.
When driving the machine, he sits on a seat made of 2 by 12-in. wood mounted in front of the pickup bed. He also has a tow bar mounted on front of the machine so he can transport it on the highway.
Out-of-pocket expense was less than $100.
For more information, contact: FARM SHOW Followup, Lloyd Williamson, 19201 East Hefner, Luther, Okla. 73054 (ph 405 454-3449).
To read the rest of this story, download this issue below or click
here to register with your account number.
