You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
PVC Rope Wick
I made a front-mount lift frame for a PVC rope wick that's simple but works great. I used the frame from an old Deere KBA disk. It attaches to the front weight brackets on the tractor and also to the grill guard. The PVC pipe lays on a long piece of angle iron. The ends of the iron pipe from the disc frame are notched
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
PVC Rope Wick ROPE WICK APPLICATORS Rope Wick Applicators 14-1-31 I made a front-mount lift frame for a PVC rope wick that's simple but works great. I used the frame from an old Deere KBA disk. It attaches to the front weight brackets on the tractor and also to the grill guard. The PVC pipe lays on a long piece of angle iron. The ends of the iron pipe from the disc frame are notched and 8-in. pieces of angle iron are welded to each. The angle iron that sup-ports the PVC is then bolted to these brackets on the iron pipe. A single cylinder raises and lowers the wick applicator by tilting the lift arms up and down as needed. (Don Gibbs, 5428 Onondaga Rd., Onondaga, Mich. 49264)
To read the rest of this story, download this issue below or click
here to register with your account number.
