You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Fold Down Exhaust Pipe
"After we bought an International 786 tractor we discovered it was too high to fit into any of our buildings so we decided to shorten the exhaust pipe up with a fold in the middle," says Jay H. Kneasel, Lebanon, Penn.
Kneasel first cut the pipe in half, then cut holes in two pieces of heavy angle iron and welded
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Fold down exhaust pipe ENGINES Engines 9-3-28 "After we bought an International 786 tractor we discovered it was too high to fit into any of our buildings so we decided to shorten the exhaust pipe up with a fold in the middle," says Jay H. Kneasel, Lebanon, Penn.
Kneasel first cut the pipe in half, then cut holes in two pieces of heavy angle iron and welded them to the ends of the pipe. The pieces of angle iron were then hinged together. To hold the pipe tightly together in the upright position, Kneasel put a small hand clamp on the side opposite the hinge. When he wants to get into the machine shed, he simply releases the clamp and drops the top half of the pipe.
To read the rest of this story, download this issue below or click
here to register with your account number.
